-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Setting up / Tuning an HD6 Carb
- Thread starter ianh
- Start date
Share this page
https://heine.nusa.co.za/Library/SU Carburettors.htm
The service manual and Tech Talk by Nock are valuable referances as well. I use several different tools for the job, a unisync, colortune and the SU tuning kit. I have never had great luck with lifting the pistons and rely mostly on getting the basics set and then reading plugs.
HTH
The service manual and Tech Talk by Nock are valuable referances as well. I use several different tools for the job, a unisync, colortune and the SU tuning kit. I have never had great luck with lifting the pistons and rely mostly on getting the basics set and then reading plugs.
HTH
Offline