• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • NOTICE: This "Classifieds" forum is expressly for posting items for sale or wanted. Post any technical question in the appropriate marque forum!

    IMPORTANT: Please be aware that there are a lot of scammers on forums like this, so please exercise due diligence as we can't be responsible for transactions between members. See this thread for at least one type of scam to be aware of: Private Message Scam (there may be others)
    If you are suspect of a member being a scammer, please send me a PM with details.

  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Wanted Servo for BN4 has to be original 1957 or before any condition considered.

Share this page

W

Wrovert

Freshman Member
Country flag
Offline
I am renovating a Austin Healey 100/6 Bn4 I would like to fit a break servo bit it has to be original 1957 or before. The car is being prepared so that I can enter the Italian 1000 Miele race so every thing has to be original or as could have been fitted up until 1957. I would be happy to refurbish ,or one already refurbished, a unit and will consider any condition.
 
BN4s did not have brake servos.
 
Yes I know but for 1000- Mile race you can have upgrades as long as they are age related. so the
keep the original front brake drums I was hoping to uprate the efficiency of the braking system. May be just to ambitious so I will stay with original setup.
Thanks for your reply though it was helpful.
 
An age related upgrade would be disc brakes.
 
I converted my 100 6 to disk brakes, it was a great improvement in braking power. I think it was an option available for the cars so would be period correct.
 
100S's had disc brakes. It is period correct.
 
thanks for your help and you are all right disc brakes on the front was an age related upgrade for the 1957 BN4
 
Early 3000 disc brakes (Girling) are a direct bolt on to a BN4. I believe the 100S disc brakes were Dunlop. And those are unobtainium.
 
Wrovert said:
I am renovating a Austin Healey 100/6 Bn4 I would like to fit a break servo bit it has to be original 1957 or before. The car is being prepared so that I can enter the Italian 1000 Miele race so every thing has to be original or as could have been fitted up until 1957. I would be happy to refurbish ,or one already refurbished, a unit and will consider any condition.
Click to expand...
I might have found my own answered to this? The BN1 seal is 2.3/4 inches for all other cars it states on the suppliers sites BN4 To BJ7 2,7/8 inch I measured mine and it is actually 2.3/4 inch so even though it a a BN4 car it still uses a BN1 Oil seal.
I know that the can was and early BN4 Longbridge built car, so may be this is the reason ?
 
John Turney said:
Four-wheel disc brakes were an option on the BN4. I believe they were the same as on the 100S.
Click to expand...
100-Six optional Dunlop disc brakes were not the same as the 100S. A quick way to recognise the difference is the 100-Six has a two bolt fixing on the calliper where a 100S has four.
 
Back
Top