Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hi - I'm fitting a Girling servo to my MK1 BT7. Although the MK1 did not originally come fitted with a servo i want to mount it in the correct location of the MK2 on the back of the pedal box foot well. I have an original pair of brackets and wondered if any one out there had reference to the correct/original hole positions for me to drill through the foot well. Best to get it in the right place rather than guessing. Many thanks Richard
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Servo fitting MK1 3000
- Thread starter Cooperman
- Start date
Share this page
I found that the bracket needed bending prior to install. fit the bracket to the servo and hold it up there to get an idea where it goes first. Then you might mark the corners , take it off the servo and mark the holes for final install. There is preferred angle to the installation of the servo depending on brand. IE: mount it at X degrees. I don't have that car anymore so I can't measure.
jerry
jerry