• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Seatbelt Reinforcing Plates for BJ8

Share this page

Patrick67BJ8

Patrick67BJ8

Obi Wan
Silver
Country flag
Offline
Does anyone know of a source for the seatbelt anchor reinforcing plates for a BJ8? My new floorboards did not come with them and now I have to try and locate a couple of them.

These are the plates that are between the seat tracks and out sills of both doors. The have a large "eyebolt" that screws into them and the seatbelt attaches to the eyebolt.
Thanks!
 
From memory, my belts came with giant, thick, round washers that you probably could get at any hardware store. I don't think they come with the floorboards but with the belts as the cars were not originally equipped with seat belts.
 
richch said:
The enlongated D shaped laminated plate that welded into the floor pressing is available from Kilmartin.
Click to expand...
Rich, Have you tried to fit the Kilmartin pieces? I had a friend send them back to a vendor because they didn't fit. He ended cutting off his old ones and spot-weldeding them to his new floorboards.

The BJ8 attachment is different than the BT7-BN7's, Plate "RLA" in the parts manual.
 
Back
Top