• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Seat kit padding installation

Share this page

J

John_Progess

Jedi Warrior
Country flag
Offline
Ok so I purchased the Moss kit along with the new padding. The padding has no instructions to tell me what piece of cloth/horse hair goes to what part of the seat. I looked on the Moss site and their tech section is down so where can I find info on how to finish the seat. I have done seat installations on MGA,MGTF and an Austin Healey 3000 so I an not totally without a little experience. Any help would be appreciated and have a good day!

John
 
I just restored my early TR4 seats 6 months ago. I got my horse hair padding set from The Roadster Factory, but it should be the same as the one from Moss. Strange they didn't send instructions.

As I recall the U shaped pieces that are part of the total back padding go against the metal seat back and then the larger back padding piece is on top and fold approximately 1 or 2 inches round the back.

I have the instructions I got with my TRF set, but the file is to large to import.

If you contact me via my personal website at www.jakegingervila.wix.com/bobs-vintage-cars- then select the contact tab at the upper right corner I can email them to you.
 
Back
Top