• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
  • NOTICE: This "Classifieds" forum is expressly for posting items for sale or wanted. Post any technical question in the appropriate marque forum!

    IMPORTANT: Please be aware that there are a lot of scammers on forums like this, so please exercise due diligence as we can't be responsible for transactions between members. See this thread for at least one type of scam to be aware of: Private Message Scam (there may be others)
    If you are suspect of a member being a scammer, please send me a PM with details.

Tips
Tips

For Sale scrapping two 59 Tr3a's

Share this page

mctriumph

mctriumph

Jedi Knight
Silver
Country flag
Offline
Lots of spare tr 3 bits. PM your needs/ wants , Fire sale prices I just want to not scrap it all....
Mad dog
 
Hi, I bought a 60 tr3 from a widow earlier this year and I'm missing alot of parts, wondering if you have a windshield, the back 3 cockpit surrounds, front and rear bumpers and brackets, bonnet spring assy, lower cranking guide and brackets. I live in Wisconsin so I don't know if you ship or I take a road trip. If you could let me know I would appreciate it, thanks.
 
I have a lot of this stuff, I would suggest a road trip. We used to drive to RA to race and it seems
like a 10 hour tow was the usual. Faster in a vehicle not towing. Shipping a windscreen is NOT a thing.
Mad dog
 
Hi MD, are the headlight trim rings in good shape? I am looking for the type that clip into the forked clip on the headlight bucket, also need the cast aluminum bonnet safety catch.
Thank you , Frank
 
Hello, looking for a reasonably good late model chrome door handle for a 3a.?
Front and rear bumpers in decent shape?
Thanks Peter
 
All used bumpers have some "issues" that can make them not worthy of use .Depending
on the car and its level of "patina". Door handles are easy as they last longer than the car.
I do have these bits, and of course would like to find them a home,
Mad dog
 
Would love to find the two lower master cylinder curved brake and clutch to reservoir tubes. One of mine snapped trying to get it off, and I don't
have a good tube bender.
 
Last edited:
How about lock cylinders and keys for doors, glove box and trunk/boot? Matching ignition is a bonus but not required. Does anyone know if a locksmith can make a key from a cylinder?

Also a convertible roof? I don’t care about the condition of the windows if they are even there.
 
I have bits that were jet cut to reproduce most of the mechanism. It takes a good man
an hour to finish one, drilling, tapping filling ect.
Mad dog
 
looking for bonnet hinges and front bumper with mounting brackets. Present hinges have drilled holes through to allow through bolt to attach to bonnet and scuttle, that's a little too rough for my use. My car is pretty rough and just trying to get through required inspection to relicense so ok with rough looking bumper. If you have any and could provide a picture that would be great.
 
I believe I have a good pair of brackets. Hinges are available new so I have a sack of used ones
Will verify the brackets, hinges are free.
Mad dog
 
mctriumph said:
Lots of spare tr 3 bits. PM your needs/ wants , Fire sale prices I just want to not scrap it all....
Mad dog
Click to expand...
I'm looking for the vent fitting that screws into the filler neck below the cap. Does anyone have one, or know where to get one? I'm working on a fiat 124 with the tr6 (I think) filler cap. It's a magnetic cap. Also, is there a rubber seal for this cap, or is the magnetic assembly machined to seal.
Kind Regards
 
Back
Top