• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

RVC Tach

Share this page

Rut

Rut

Obi Wan
Offline
I'm looking for an RVC tach to use in an original Bugeye tach. How do you know which ones are RVC if you can't see the face of the tach? Do they come from the 1500 models? I also need a nonfunctional Bugeye tach to put it in and I assume you can use MK1 and MK2 Sprites as doners.
Thanks, Rut
 
The 1500 should have an RVC tach.

I don't think you can glance at the face of the tach and tell which type it is. You have to have a good, close-up view to see whether or not it has "RVC" printed on the face.

If you can see the back of the tach the difference is readily apparent. The RVC tachs typically have an insulated plate on their back side and two terminals will be on that plate. One terminal will be a male spade lug for 12V power in and the other will be a bullet connector for connecting a wire going off to coil (-).

The early RVI tachs will either have the little block on the back with the loop of white wire or on the later models, two bullet connectors will be on the back with the loop of white wire being inside the gauge case.
 
Thanks, I would like to identify one from eBay pictures and I don't know what to look for. This should help a lot if they show the rear.
Thanks, Rut
 
If you have any doubts, post links here and one of us will look at the auction and let you know what we see.
 
Back
Top