• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Rover P4 60

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
Saw one in a yard. Looked solid but paint was oxidized.Are parts still available for these cars? What would be a reasonable price to pay for a saloon like this that needed a complete restoration? Karl(Tr3 and TR4A)
 
There's quite a lot of support for the ol' P4. Internet and credit card will get you service items, although serious restoration is best handled as locally as possible. You may find the doors, for example, are aluminium. The 60 was right at the bottom of the range, with a four-pot engine that's really Land-Rover. So no trouble getting engine stuff! However it's a heavy car for so little power.

As for price, my motto has always been: pay as little as possible! For a total project, I wouldn't go near 4 figures, and I'd be wanting 3 to be as small as I could get them.

If you do go for it you will end up with a roomy luxury car; up to you what you do about the power issue. The interior is walnut and leather, so make sure it's complete. Restoration of that isn't cheap unless you can do it yourself. Make sure also that the windows are intact, as the rear screen is in 3 curved pieces.

Good luck!
 
Back
Top