• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A rings inside bevel

Share this page

T

TFB

Jedi Knight
Country flag
Offline
Another ring question.
New rings came with instructions to mount dot or "top" upwards.My rings have no dot or top but have an inside bevel on one edge.
Although 1st compression ring and second came marked in separate 4 pack they appear identical.
Any thoughts appreciated,bevel up or down.
Tom
 
In general, the bevel will go up. Any marking, whatsoever, is also an indication of the top side. That said, there are exceptions, so it would be worth checking with Moss to see what they say.
 
Thanks John.The only marking is imprinted xr8600 on the same side as bevel.
I think up ,but calling Moss is a good idea for tomorrow.
Thanks for reply
Enjoy the holiday
Tom
 
Back
Top