• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Ribcase rebuild help

Share this page

smaceng

smaceng

Jedi Knight
Country flag
Offline
I'm in the process of rebuilding my ribcase. I replaced all of the gears including 2nd and 3rd. When I installed 2nd, it was snug with .001-.002" of axial play. But when I installed 3rd gear with the locking collar, there was .010 to .012" of axial play. As a result, 3rd gear can move about the mainshaft. All parts look good, with no wear on the needle bearings or mainshaft. Is the end play taken up when the whole mainshaft gets installed, or do I need to do something?
thanks for your help.
Scott in CA
 
Back
Top