• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR5/TR250 Rheostate switch

Share this page

You must gain access to the back of the dashboard. Remove the speedometer and tach, Then remove the screws holding the dash in place. You can then pull the dash forward, gaining access. Remove the screws holding the rheostat.
 
I have the dash apart. I can see the switch and the screws holding the switch, but the shaft goes through the dash and I can not seem to figure out how to get the black knob off so I can slip the switch through the dash and out...
 
Nose,

They can be a bugger to get off and some just end up breaking them off. You could try a little heat from a heat gun or blow dryer but make sure to protect the dash. I ended up breaking mine as it was stuck on solid.

Tush
 
Ok, i figured it out. the black knob and the shaft of the rheostat are one piece. Pull the knob straight out. Be careful not to damage the black knob. I got shaft off, and was able to unscrew the switch and take it out for better look.
looks a little rusty. most likely that's the issue with it not working.....
 
Back
Top