• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A RHD Steering Column Hole Blanking Plate

Share this page

PatGalvin

PatGalvin

Jedi Warrior
Country flag
Offline
Hello all

Can anyone provide a photo of the blanking plate that covers the steering column hole on the passenger side? I ordered a gasket but need the metal plate which I'm happy to accept as a donation - or I may need to fabricate. The plate doesn't appear to be available through the usual sources. For a 59' TR3A.

Pat
 
Pat still looking for a extra.
 
It looks like this. Triangular shape with hole in center to let the rubber seal show through.

IMG_0908m.jpg

Joe
 
Thanks Joe

Does anyone have an extra one of these blanking plates? Marv?
 
Pat I have one , it's a little pitted from rust though. A couple coats of high build primer and some sanding and I think you could make it look almost new. I need to go to the post office on Wed I could get it out to you N/C

Keith
 
Part is on it's way.
 
Back
Top