• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Rewiring Boot Wiring

Share this page

1965_MGB

1965_MGB

Jedi Warrior
Offline
As some know, I am working in the boot of my 65 B' and I am trying to clean things up back there, and fix the DPO wiring that was done eons ago.

I am considering getting the proper color wire from British Wiring, and using a connector to cut the original harness wires, and attach them to the new wires.

I am planning to replace the entire harness down the road, but my budget for getting the B' running has been blown.

I have not dealt with BW as yet, and was wondering if some out there might have an opinion one way or the other.

Many thanks.
 
DrEntropy

DrEntropy

Great Pumpkin
Platinum
Country flag
Offline
Shouldn't be a problem Ron. They'll be helpful.

The car you have was equipped with soldered bullet connectors when it left th' Isles. BW has the right connectors for it.
 
OP
1965_MGB

1965_MGB

Jedi Warrior
Offline
I was looking at the crimp tool that they have, and I really like buying tools, but that is kind of steep for a tool I think.

I will probably solder them. Their catalog leaves something to be desired at best. I have been working on an order for them. I do like the prices on most of the stuff, but the tool is kind of a lot right now.

I just read my post, and it has some horrible grammar. You will have to excuse me, I have been up since 0400. Had to take GFs mom for surgery this morning and I just got home.
 
DrEntropy

DrEntropy

Great Pumpkin
Platinum
Country flag
Offline
Solder 'em Ron. Still the best way to deal with automotive wiring connections AFAIC.
 
kennypinkerton

kennypinkerton

Yoda
Offline
:iagree:
 
David_DuBois

David_DuBois

Jedi Warrior
Offline
Ron - You are taking the right approach to correct the boot wiring in your car. I would suggest getting the crimp bullets and solder them to the wires, they solder easier than the ones designed for soldering (go figure). Before starting the work, look at the article, Electrical Connection Preparation in the Other Tech Articles on my web site at: https://homepages.donobi.net/sufuelpumps/ for tips on making good, long lasting connections.
Cheers,
 
OP
1965_MGB

1965_MGB

Jedi Warrior
Offline
Thanks guys, I always like to solder instead of crimp. I guess I was just looking for the fast way out. Like most projects, I just want to get it done, but now after getting over my initial hurry, I will slow down and do it right.

Back to the catalog. :smile:
 
DrEntropy

DrEntropy

Great Pumpkin
Platinum
Country flag
Offline
Things kinda slow up there this AM, Rick? :smirk:
 
Similar threads
Thread starter Title Forum Replies Date
UmmYeahOk GT6 Rewiring Question Triumph 12
R Rewiring a 1967 3000 Austin Healey 17
MikeAH100M Rewiring/Coil Question Austin Healey 4
B Plan on rewiring a BJ7 with a new harness Austin Healey 12
P Removing the horn for rewiring Triumph 5
M Small rewiring project Triumph 37
hondo402000 TR6 TR6 rewiring Latest Triumph 4
hondo402000 TR6 71 TR6 Rewiring project Triumph 11
hondo402000 TR6 Rewiring Project for TR6 Triumph 7
Bruce_B Rewiring 59 BE and first question... Spridgets 1
B Rewiring my 79 mIdget Spridgets 15
GT6_Mark GT6 Tips and Hints on Rewiring GT6, Please Triumph 24
Tinkerman TR2/3/3A Rewiring a 60 TR3 Triumph 8
drooartz Tactical question--rewiring strategy Spridgets 12
V Rewiring questions Triumph 11
G Wanted Tr4a boot lid Triumph Classifieds 2
mctriumph General TR Spring boot sale Umpteenth Annual Triumph 5
5 BJ7 Boot Rust-Through Austin Healey 13
angelfj1 TR2/3/3A TR3A Boot Millboard Install Triumph 7
JohnGone Wanted Q: Small Boot, Small Spare Tire? And, Jack needed. MG Classifieds 2
K TR2/3/3A boot drain troughs 59 tr3 Triumph 7
AUSMHLY Boot Lid Identification Austin Healey 2
J Restoration Progress - Boot Installed Austin Healey 1
B BJ7 Boot Trim Austin Healey 7
B Fitting the Boot Lid Seal Austin Healey 8
Rob Glasgow Boot Liner Edge Finish Austin Healey 11
chicken Boot Lid Badge Austin Healey 8
F TR2/3/3A Boot floor Triumph 50
steveg TR6 Dealing with Rack Boot Triumph 3
steveg TR6 Steering boot clamp wire - why? Triumph 2
T How do you cover your battery in the boot? Austin Healey 5
S Securing the jack with strap in BJ8 boot Austin Healey 11
Michael Oritt Boot floorboard? Austin Healey 9
S Boot Liner - BJ8 Austin Healey 19
C Under boot and under bonnet paint? Austin Healey 7
tahoe healey Leak into boot Austin Healey 17
B TR6 Boot lid thread plates loose in stiffener Triumph 1
G For Sale TR6 Matador Red Interior and Boot Triumph Classifieds 0
B Soft Top Boot Cover - BJ7 Austin Healey 5
A BN2 Boot Lid Austin Healey 4
W Gear Lever Boot for BN2 Austin Healey 5
ckeithjordan TR2/3/3A Boot Trim Triumph 3
1 Wedge Breaking Into a Trunk Boot Triumph 3
R TR2/3/3A Boot/trunk floor Triumph 5
B Dynamat in Boot? Austin Healey 7
S TR4/4A Fascia support and shift rod boot Triumph 0
S TR4/4A Handbrake cable rubber boot at clevis pin end Triumph 1
B Wanted I'm looking for a boot [trunk] lid and drivers rear fender for a 100/6 or 3000 Austin Healey Classifieds 0
H Wanted Braket that connects the boot lid to the boot lid stay strut on a Herald. Triumph Classifieds 0
Rhodyspit75 Replacing boot floor need bracing? Spridgets 2

Similar threads

Top