• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

retro-fit 1970 etype with three carb set-up

Share this page

D

donmac

Freshman Member
Offline
I have intstalled a three carb set up on my 1970 E Type. Having trouble getting the manual choke to work with out binding. Anyone have any ideas on the subject.

Don Mac
 
Make sure line is as straight as posssible with no hard turns. Maybe lube cable housing with silicone or powdered graphite ( one or other ). Does the choke work by hand with the cable unhooked? Check throttle plate clearances make sure they move OK and check the main jet is centered. I am assuming SU setup?
 
Can you supply a few detail photos? There are a number of things which will cause the thing to bind up. Is the cable a solid one or multi-strand? Have you a manual detailing the proceedure to set it up?

Just trying to get info to guide ya.
 
Hiya Larry! I think we could safely assume SU's but ya never know. :wink:
 
Back
Top