Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Our restoration of a '63 BJ8 (first day of production) is going well. We installed the boot yesterday. The only issue was getting the latch to line up. Never had a problem on previous cars I have worked on, but this one was a 3-dimensional puzzle. Had to get the boot latch in the right position and the shroud hook in the right position. Took about 6 tries. Pretty simple mechanism compared to modern cars. Made me wonder if anyone ever had someone pry up the boot to steal stuff from the trunk. That would cause a lot of damage!
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Restoration Progress - Boot Installed
- Thread starter Jerry
- Start date
Share this page
bob hughes
Luke Skywalker
Offline
Yes it is a bit of a puzzle, it took me several goes to get it right, I should have looked inside before I dropped the tank in, which is what I intended to do, but eagerness to get the job finished for this years Goodwood put common sense out of the window. I just need to lean a bit on the bottom left hand side and the hook connects wonderfully
Bob
Bob