-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Replacing MBG choke cable
- Thread starter kevlin
- Start date
Share this page
Kim de B
Jedi Warrior
Offline
Easiest way to get at it is from the radio opening. If you've got a blanking plate in there, pop it out and reach down from there. If you've got a radio, you'll have to take it out. That's still easier than trying to get at it from underneath.
(And I know, because the choke knob was loose in my '66 -- I had to tighten the nut that holds it to the back of the dash -- and I had to take my radio out to get at it.)
Yep, it's a bit of a bear to get at, that's for sure...
(And I know, because the choke knob was loose in my '66 -- I had to tighten the nut that holds it to the back of the dash -- and I had to take my radio out to get at it.)
Yep, it's a bit of a bear to get at, that's for sure...