Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am replacing the front wheel bearing and was wondering how others replace the inner race. Now I am using a punch to remove the race and a brass drift to pound the race back inside the hub. I am thinking someone has a better idea??? I am slowing tapping the new race in with the brass drift and maybe that is best.
I guess the races would come together as the big nut is tightened, but it seems the force to pull them together would be more force than nut tightening can deliver….
I guess I will slowly tap the race into the hub until the race bottoms out in the hub. I suppose the pros would have a press to do the job.
Steve
I guess the races would come together as the big nut is tightened, but it seems the force to pull them together would be more force than nut tightening can deliver….
I guess I will slowly tap the race into the hub until the race bottoms out in the hub. I suppose the pros would have a press to do the job.
Steve
