• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Replacing Front Signal Light Lens

Share this page

Whytock

Whytock

Freshman Member
Offline
To replace the front signal light covers do you have to remove the bumper? The previous owner may have messed with them before. I can only see the end of the bolt as if its been fastened from the inside. Was this the way they were normally fastened or should the screw head be visable.

Thanks
 
Not exactly sure what year or model your talking about, but usually the screw heads are exposed.....not sure why they wouldn't be? If it's a rubber bumper B I don't think removing the bumper will help cuz it's all sealed up back there.
 
Back
Top