Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
John_Progess
Jedi Warrior
Offline
What is the preferred method of replacing the hing pin in these aluminum hinges? Thanks for your help!
John
John
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Replacing door hing pin on 64 BJ8 ph I
- Thread starter John_Progess
- Start date
Share this page
John Loftus
Darth Vader
Offline
John,
I have it in my notes that a Chevrolet part # 20046147 25d3 pin will work. You need to ream the holes to get the new pin to fit and they need to be cut to length. Some auto supply stores also carry replacement pins (HELP! brand) so you could look there too.
Another option is to buy a used (but not too used!) hinge set from suppliers but that will be far more $$.
Cheers,
John
I have it in my notes that a Chevrolet part # 20046147 25d3 pin will work. You need to ream the holes to get the new pin to fit and they need to be cut to length. Some auto supply stores also carry replacement pins (HELP! brand) so you could look there too.
Another option is to buy a used (but not too used!) hinge set from suppliers but that will be far more $$.
Cheers,
John
