• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Reinforcing kits

Share this page

I didn't do the Moss kit, but made my own reinforcing gussets, as others have done. It seems the large mass of the 3000 engine creates forces on the engine mounts that can create small stress fractures in the frame fore and aft of the mounts. Welding in gussets works to stiffen the mount in the direction of flex AND distribute the forces over a larger area = less localised stress on the frame. I think.
 
 
Andrea, nice work. Did you also install a new front cross member? I may end up doing that on my '53, it has a split on seam from being lifted incorrectly. cheers
 
Yes. if I understand correctly, it was very badly damaged
https://picasaweb.google.com/lh/photo/72GWDxdXbDQxJSHYTih0W9MTjNZETYmyPJy0liipFm0?feat=directlink
https://picasaweb.google.com/lh/photo/bwhO7Hpf352KoYr-jieq5dMTjNZETYmyPJy0liipFm0?feat=directlink
https://picasaweb.google.com/lh/photo/-6yLq2Z1YOoHv7qoUq2pJdMTjNZETYmyPJy0liipFm0?feat=directlink

I have also added one other reinforcement at extreme front end, placing my oil cooler on it, it appear a valid contribute to stiffness
https://picasaweb.google.com/lh/photo/8zqiagN5f5qV-V8Ky2_-G9MTjNZETYmyPJy0liipFm0?feat=directlink
https://picasaweb.google.com/lh/photo/PY8IIiIie2EWM9SetKf8RNMTjNZETYmyPJy0liipFm0?feat=directlink
https://picasaweb.google.com/lh/photo/1xoXdYFkDtgxDgdoUZn4BdMTjNZETYmyPJy0liipFm0?feat=directlink
NOTE how all the cooling structure have a part to the rigidity of front end, without sensible weight increase
Cheers
 
Back
Top