-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR4/4A Reducing rear chassis flex.
- Thread starter malbaby
- Start date
Share this page
Offline
I need to do some work on mine this summer, so this project is interesting to me. I am looking on my phone and don't have my car handy for reference, looking forward to more pics and description. I know the two cars I have had you can feel the door Gap at the top back open and close with your fingers, interesting to see what improvements are made.
Step 2. Had a sheet of 3mm plate cut, and welded on. Maybe unnecessary, but why not..
Step 3. Welded in some 5mm thick strap braces linking the 3 bridges together.
Step 4. Boxed in the coil spring bridge supports.
Still have some chassis paintwork to complete.
Step 3. Welded in some 5mm thick strap braces linking the 3 bridges together.
Step 4. Boxed in the coil spring bridge supports.
Still have some chassis paintwork to complete.
