• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Recommendation/source for poly bushings

Share this page

T

tdskip

Yoda
Country flag
Offline
In research mode here still, but wanted to see what vendor you all recommend for poly bushings. I've decided against rubber for a number of reason (which I know some would disagree with).

I'm not looking to build a race car and would like to be somewhere in between stock rubber and delrin in firmness.

Any ideas/experience to share?

Thanks!
 
Just did my BugEye's top trunion bushings. Switched from nylatron to the poly from Moss. I don't have many miles on it since but it does seem to be fine and a little more compliant. The nylatron ones were 20 years old or so...not worn out but looking for something a little softer.
 
Back
Top