• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Rebush SU Carbs Black Magic?

Share this page

60Bugeye

60Bugeye

Jedi Hopeful
Offline
SU carburetter rebuilds seem like a fairly straightforward thing a DIY shade-tree mechanic could handle. After all, the SU carbs seem mechanically pretty simple.

In my research it seems that "re-bushing" requires professional "black magic."

Forgive my ignorance (I just got my Bugeye project :smile: ), but what does "re-bushing" really involve?

Is it THAT difficult to do?

Does it require special tools or years of experience?

Perhaps it does; just attempting to understand why.

Cheers!
 
I have rebuilt many SUs over the years and have never found one that needed to be re-bushed. Most will need new throttle shafts which will be obvious as soon as you pull them out. The shafts wear in the carb body. Rarely do the bodies wear.
I am not saying the bodies do not wear, and larger throttle shafts are available for worn bodies. It is a matter of matching the new larger diameter shafts to the carbs. Any machine shop can do it or anybody with a steady hand and a good drill press can do it at home.
 
Excellent choice, I noticed you said you didn't know quite where to dive into the big project on another thread, they are pretty straightforward and easy to rebuild, and it is a nice job because you just take them off the car and you can do all the work on a nice table or workbench rather than on your back or whatever for some jobs.

Take one apart at a time, then you will have the other for reassembly reference.

There are prerry good exploded diagrams in the manuals, I think you had the Clymers, that is a good manual and reference for your work on the carbs and the rest of the car.

Oh, yes another reason to take one apart at a time, the pistons and top piston housings a matched sets, often doesn;t work to try to mix and match certain parts from different carbs.
 
To be completely correct (and I am pretty sure this is right) HS2 Carbs never had bushing for the shafts, HS4's did. I am fairly certain that you can now get bushings for HS2's but, mostly it refers to spritenuts description - redrilling the body for a larger shaft. there is a description somewhere on these boards (May be the MG forum). I can't usually find stuff like that.
 
glemon said:
Excellent choice, I noticed you said you didn't know quite where to dive into the big project on another thread, they are pretty straightforward and easy to rebuild, and it is a nice job because you just take them off the car and you can do all the work on a nice table or workbench rather than on your back or whatever for some jobs.

Take one apart at a time, then you will have the other for reassembly reference.

There are prerry good exploded diagrams in the manuals, I think you had the Clymers, that is a good manual and reference for your work on the carbs and the rest of the car.

Oh, yes another reason to take one apart at a time, the pistons and top piston housings a matched sets, often doesn;t work to try to mix and match certain parts from different carbs.
Click to expand...

Yep, I think this will be a good first sub-project after I go through the lot and photograph everything.

Also, I have 4 SUs and them are in a box, so will have a lot to practice with. :smile:
 
spritenut said:
I have rebuilt many SUs over the years and have never found one that needed to be re-bushed. Most will need new throttle shafts which will be obvious as soon as you pull them out. The shafts wear in the carb body. Rarely do the bodies wear.
I am not saying the bodies do not wear, and larger throttle shafts are available for worn bodies. It is a matter of matching the new larger diameter shafts to the carbs. Any machine shop can do it or anybody with a steady hand and a good drill press can do it at home.
Click to expand...

Good to know that replacing bushings is not necessarily obligatory. Thanks!
 
JPSmit said:
To be completely correct (and I am pretty sure this is right) HS2 Carbs never had bushing for the shafts, HS4's did. I am fairly certain that you can now get bushings for HS2's but, mostly it refers to spritenuts description - redrilling the body for a larger shaft. there is a description somewhere on these boards (May be the MG forum). I can't usually find stuff like that.
Click to expand...

I think these are HS2s since they measure 1.25, so this may be a non-issue for me. Thanks!
 
Back
Top