Well I talk to Harold the guy Tomshobby suggested, and he is totally cool. He has been rebuilding water pumps since 1957, and we talked for about a ½ hour about water pumps. I am only guessing, but it seemed to me he has a larger business with a staff and we were talking about water pumps just for fun. I did not realize that the housing and seal need to fit square or exactly on the same plane with a small amount of preload on the spring on the seal. He also recommended that I put the housing in a lath and turn the surface true and flat where the two meet, but the surface looked good on one of my old casings, so I used it without turning it. Anyways, he sold me a seal with a metal back that worked fine for a couple of dollars. I reused some bearings that I had, but he called a buddy and that guy had some bearings that would work, but the bearings are narrower so the distance piece between the bearings needs to be longer. Again, Harold is a great guy with a wealth of experience, and I actually believe he enjoys helping people, you do not see that every day.