• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Rebinding electrical harness in cloth?

Share this page

J

JOeyKnapp

Jedi Hopeful
Offline
After reading the BaT story, I looked around the site and saw a reference to this:
https://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280892835266+&viewitem=#v4-41

The guy said the harness had be rebound in cloth. I would love to do that to mine.

Is there a source for the original style cloth? I did a search here and couldn't find anything.

Thanks!

(tomorrow is our last day of post-planning at school, I will try and get some pictures of my project up in the next few days... :smile: )
 
Hmm.. on closer inspection it looks like he could have just wrapped the harness with cloth tape.

My harness seems to be in good shape, but I would love an original (type) cloth binding for it.. Anyone know of a source?
 
I had my custom, homemade harness for the Prefect bound at Rhode Island Wiring last year. Not cheap but they did a beautiful job. They charged a one-time $5 setup plus $4 per foot. I thought it was well worth the price. Here is a composite sample as I am in the process of installing it, two under the bonnet and two under the dash. Yes, that one wire taped outside the harness was my mistake, added after I received it back.
 

Attachments

  • 28752.jpg
    28752.jpg
    91.3 KB · Views: 297
So, when you send a harness to Rhode Island Wiring do you just tape up the sections that belong together and mark where the harness would split off?
 
Right. I taped mine at about 6 or 8 inch intervals and carefully taped each branch where necessary. I also included instructions to stop the braiding at the last tape at each end. I also phoned to discuss all this first and got any advice necessary. They were really helpful.
 
I guess I will lay my harness out and measure it and determine whether or not to buy a new one or get mine wrapped..
 
this:
https://www.ebay.com/itm/1-4-EXPANDABLE-S...=item53db15ab97

might be a good alternative for me. I know I will be changing to an alternator from the start, but I would hate to pay for cloth binding and then need to alter the harness down the road. That place has a variety of different tech-flex colors and patterns. Maybe I will go with that. I don't want it to look like a modern harness, though..
 
I'm doing a 62 Mini harness right now and I'm using what I've used on all my LBCs
Black cotton cloth bicycle bar tape. Bit for the lack of colored tracer threads, it looks good.
It's rare to find in bike shops anymore but easily obtained from Amazon. About four rolls for a Sprite, five for a Morris, not sure yet for the Mini. It can be undone for corrections up to a point. At about $3 per roll, you get a new looking black cloth covered harness.
 
Glen, there is also a tape that Home Depot sells called "friction Tape". It looks like electrical tape, but it is cloth. I thought about using that, but I wanted a little color in there too... I still have some time to decide..
 
Thanks for the info, bob. I used it on some stereo wiring in my Jetta, because it matched the factory stuff. It is inside, so I guess it stays ok..
 
Instead of friction tape (because of the problem mentioned above) you can get a similar cloth tape from British Wiring that looks good but does not get sticky on the outside. A little more expensive but well worth the difference.
 
bobhustead said:
Friction tape tends go get very gooey on the outside over time. It has the cloth look, but I wouldn't use it.
Bob
Click to expand...



Theres a reason baseball player's used to wrap the grip's of bats with the stuff. Least we did when we were kids.


Kurt.
 
Back
Top