Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hello gang. The dog needs help again as I have been kicked today. With the temps getting warmer I have an issue with my rearview mirror coming out of position from the road vibration and the cockpit being hot with the top up. As I drive it slowly, it comes down out of position where I need it to stay at to see. I looked at it and it just looks like a ball on the back of the mirror fitting into a socket (the base mounted to the windshield frame). Is there anything I can do to firm this back up so it will stay or is it just worn out?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Rearview Mirror needs tightened up.
- Thread starter Midget78
- Start date
Share this page
lbc_newbie
Jedi Warrior
Offline
Yo, dog... I took my stock one out and put in an older one that mounts on the windshield center shaft. I like the older one better. You are welcome to my original one. The silvering on the mirror showed some wear, but otherwise, the pieces are there. I think you can swap out the glass.
bgbassplyr
Darth Vader
Offline
2 words,....Duct tape.
Ed, I am thinking about going with the old Corvette look with the mirror mounted down on top of the dash in the middle. I usually like to keep things original but I can get one of those mirrors chromed for cheap from the corvette catalogs. 2 screws into the dash and its on. I dont know for sure, but Im thinking about it.