• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Rear wiring Harness on BE - questions

Share this page

Bruce_B

Bruce_B

Jedi Warrior
Offline
The front harness is fine. I'm laying out the rear harness and rear hookups out of car to make sure all works before I install it into the "cave" of the rear of the car. I've hooked it up to the front harness and have power to the rear

There's lots of Black wires (ground of course), but I don't see any ground connections coming from the front harness. If I
"Make" a ground seems seem to work, but then get squirrely. I've got everything hooked up, but when I try the blinkers, things get weird.

Are there "screwed in" grounds in the back harness? Do I need to go back there witha big flashlight and see what's up?

Thanks.
 
Rear lights are grounded internanly. make sure the screws make good grounds.
 
Jack, went back with sandfile and cleaned up the screw holes.
Let there be light!

Thanks..
 
Very welcome, that can be a real pain the first time around.
 
Back
Top