• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Rear Valance TR3A post 60000

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
My molded rear valance is in decent shape except for the left and right upper sections. I need to repair them. Does any one have a picture of what those sections should look like? I can wing it if I have to but sometimes my winging it doesn't come out so well, sigh. So any help would be greatly appreciated.

Thanks, Tinkerman
 

Attachments

  • 22864.jpg
    22864.jpg
    94.8 KB · Views: 229
  • 22865.jpg
    22865.jpg
    112.4 KB · Views: 235
Hi Tink,

Mine is out of the car so if nobody posts before I get home from work I would be glad to take some pics.

Cheers,
M. Pied Lourd
 
Tink-

Same here. In fact, I'm not positive but I think I have a post-60k valance in storage which potentially might be a better rebuilder for you - my car is pre-60k so its not needed. Are you coming down to Texas next month - if so maybe you could use it? That's only based on a very faulty memory however, so until I check storage consider it a random thought!

Randy
 
Dick: Mine is the two piece unit with the sheet metal top and straight plywood vertical section. However, here are a couple of photos of one like yours. What you also can do is use a contour gauge and take a contour from the upper part of each wheel arch. Then go to Staples and pick up a piece of card stock. Transfer the contour from the gauge to the card stock. Using this you can make a template for the places that need to be repaired.

Good luck.

119b9xt.jpg


TR2-3AOccasionalSeatandPetrolTan-1.jpg
 
Thanks guy's. I kinda figured that was the way it was set up. Randy I like your random thought, and yep we are coming down there next month so let me know if you have it. Mine is fixable and I've got the fiberglass to do it with, but I don't need another project if it's not needed.

Thanks, Dick
 
Back
Top