• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Rear Spring Rattle

Share this page

G

Guy Marshall

Member
Offline
Hi all,

My BN6 has developed a rattle from the front of the rear springs. With an axle stand keeping the axle in its normal position I can move the front part of the spring up and down - you can see the gap where I have put the screwdriver. The guides seem to be in teh right place and there are no broken leaves. Any thoughts other than new springs?


Healey.png
 
There is a rubber bushing between the spring steel and that bolt just above the screwdriver. It may have gone bad. You can buy just the bushing.
 
The picture shows the front connection point to the chassis. I may be wrong but there is just a bolt through the spring. Mine just started doing the same thing. Could a pad have fallen out?
 
Back
Top