• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Rear seat backrest pictures

Share this page

B

BJ8TONY

Senior Member
Silver
Country flag
Offline
Hello All

I am looking to see if anyone has pictures that they could post of the rear seat backrest
and how it goes together.
I believe that there are two thin metal plates that get mounted into the lower corners between the wood frame
and the vertical upright back piece.
But then I believe that there are two L-brackets with rounded edges that go somewhere.
I am not sure where the L brackets go.

Thanks
 
Hi Tony,

Hope these help.

IMG_0336.JPG IMG_0340.JPG IMG_0339.JPG IMG_0342.JPG

Good luck,
Ray (64BJ8P1)
 
Jedi thanks for the photos.
Perfect!
Any idea on the L-bracket is for.
 
Hi Tony,

Well, I tried by could not get a good picture of the "L" bracket. The "L" brackets are fixed to the wood vertical and the interior quarters slide in and are captured for support. Support for the back panel is provided by the bottom wood screwed into the seat platform with side support provided by the wood verticals with "L" brackets capturing the ends of the quarters.

Hope I am clear. If I do get a chance, I will try to take a picture.
Ray (64BJ8P1)
 
Hi all
I don't want to hijack this post, but does anyone have dimensions on the back rest? I have to make one for my BN4. I can measure from the car but I want to be sure.
Cheers
Matthew
 
Thanks GregW

That is just what I was looking for regarding the L brackets.
As I look at he pictures, I have 1 more question.
How were the metal plates that show in the corners and the round metal plates fastened to the backrest?
Again thanks for you help.
 
Back
Top