• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

rear mont holes on a 76 midget

Share this page

Not bad looking at all. Hehe, they in excellent condition are 80 bucks each. Ask me how I know.
 
I plan to go with the bumperettes out back and nothing in the front. I've got my bumpers off right now but haven't done much else as I've put all my energy and money into the motor for the past couple of months. I did pick up a 68 Sprite grill for the front. I think the grill up front combined with the bumperettes in the back will work great. Right now I'm looking for some pre 75 fenders so I can use the chrome bumper driving lights. If I don't find any, I'll try my hand at closing up the holes in the stock fenders a bit. The only portion of this mod that has me concerned is the squared off portion below the tail lights. I'm not digging that too much and have been studying ways to smooth that out a bit. I was thinking of using some patch panels from a 74. What do you guys think?
JC
 
I cut the sub tail light area out of a rusted tub that was going to the crusher. It's my plan to use these to make a fiber glass mold that I can share with my buddies. But in the very likely event that that never happens, I might just cut and weld.
 
Back
Top