• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A Rear Fuel Line Routing IRS

Share this page

B

bammons

Jedi Trainee
Country flag
Offline
The PO had cut the fuel line just under the gas tank and used a long rubber hose to connect to the hard line coming from the driveshaft tunnel. I want to make a new line and am not sure of the routing so that it does not interfere with the axle/swingarm. Does anyone have a picture they could share with me to give me an idea of the routing? Bruce
 
Hope this photo will help you.

 
Perry That helps some but what I really need to see is how/where the line from the tank routs to where your picture shows. Where does it go as it leaves the tank and does it go around the side of the differential bulkwork or over. Bruce
 
It is different between a TR4 and 4A. Take a look at this page from Rimmer Bros showing the fuel piping:

Triumph TR4-4A Pipe Work | Rimmer Bros

Order your Triumph TR4-4A Pipe Work ā›½ Low prices and fast, worldwide delivery āœˆ British car experts ā™š Call ā˜Ž 01522 568000 or ā˜Ž 1-855-746-2767
rimmerbros.com rimmerbros.com
 
Here is the rest of the fuel line.

 
OK I think I see that it is laid out different than I thought. I may not have the hard line coming from the driveshaft tunnel positioned correctly. I have the 90* bend turned toward the swing arm. It seems that in your picture it must turn down. I will get under the car tomorrow and see if I can figure this out. Thanks very much for the picture. Bruce
 
Back
Top