Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
startech47
Jedi Knight
Offline
What are the rear end ratios by year?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
rear end ratios
- Thread starter startech47
- Start date
Share this page
mccalebr
Jedi Knight
Offline
A good source for specs are the original dealer brochures. You'll find them all here:
https://www.raysmg.com/rays_mg_midget_documentation.htm
Ray
https://www.raysmg.com/rays_mg_midget_documentation.htm
Ray
OP
startech47
Jedi Knight
Offline
Thanks
OP
startech47
Jedi Knight
Offline
Looks like from the brochures on Ray's site.
1959-1968 4.22:1
1969-1977 3.90:1
1978-1979 3.72:1
1959-1968 4.22:1
1969-1977 3.90:1
1978-1979 3.72:1
regularman
Yoda
Offline
Never assume that a certain year car actually has that gear set. Too much swapping on these spridgets over the years. Also other gear sets were available, mine is a no longer available set of 39 teeth on the ring and 11 on the pinion for 3.55:1 ratio.
OP
startech47
Jedi Knight
Offline
Thanks again