Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
startech47
Jedi Knight
Offline
What are the rear end ratios by year?
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
-
When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
rear end ratios
- Thread starter startech47
- Start date
Share this page
mccalebr
Jedi Knight
Offline
A good source for specs are the original dealer brochures. You'll find them all here:
https://www.raysmg.com/rays_mg_midget_documentation.htm
Ray
https://www.raysmg.com/rays_mg_midget_documentation.htm
Ray
OP
startech47
Jedi Knight
Offline
Thanks
OP
startech47
Jedi Knight
Offline
Looks like from the brochures on Ray's site.
1959-1968 4.22:1
1969-1977 3.90:1
1978-1979 3.72:1
1959-1968 4.22:1
1969-1977 3.90:1
1978-1979 3.72:1
regularman
Yoda
Offline
Never assume that a certain year car actually has that gear set. Too much swapping on these spridgets over the years. Also other gear sets were available, mine is a no longer available set of 39 teeth on the ring and 11 on the pinion for 3.55:1 ratio.
OP
startech47
Jedi Knight
Offline
Thanks again