• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Rear brake wheel cylinder replacement lagniappe

Share this page

B

bobhustead

Senior Member
Gold
Country flag
Offline
Leaky axle seal just made me replace rear brakes. While there I decided to do the wheel cylinder as well. After some bedevilment, I discovered that the "spring plate" and "distance piece" go on first from the handbrake lever side and then the "locking plate" goes in the middle of the other two from the opposite side. I had forgotten this in the 13 years since my resto.
Bob
 
Back
Top