• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Rear Brake Help Please

Share this page

1

19Sprite65

Senior Member
Offline
I'm having a very bad night w/replacing the rear brakes after total disassembly and painting. I even took photos that don't help. The cylinder end spring on the trailing shoe side- does the weirdly bent end of the spring go thru the parking brake lever also? Unfortunately (GRRR!)I didn't mark the levers when I pulled them out of their respective labeled baggies for cleaning/painting. Is there an easy way to tell them apart? My guess is the panhead of the rivet goes up?
 
There was a thread on this very subject within the last 2 or 3 weeks. Answers were given with pix of the assembled rear breaks. I can't find it but it was well attended so look for brake questions with more than 10 replies.
 
here's the reference picture - passenger side
 

Attachments

  • 20522.jpg
    20522.jpg
    80.9 KB · Views: 180
Now copy that picture and paste it into a MS-Word Reference File and label as Spridget Technical Tips. After almost 10 years my Tech Reference File that I've copied and pasted over the years is almost 120 pages long with lots of stuff I've saved. Not indexed but a Control-F(Find) will find almost anything in a few mouse clicks.
 
and I can even send a full sized image if you pm me your email
 
That's what this forum is FOR.

All nonsense aside, the real answers are in the archives.
 
Back
Top