-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Rear Axel Drain Plug Tool?
- Thread starter LanceLyon
- Start date
Share this page
Offline
I use the same.
D
D
I replaced the drain plug with one that is made to take a 3/8" Allen wrench. Prior to that, I had made one out of some 9/16" round stock I had laying around, just machined a 7/16" square on one end, and then bent it 90 degrees, like an Allen wrench.
Jeff
[ 03-15-2004: Message edited by: Bugeye58 ]</p>
Jeff
[ 03-15-2004: Message edited by: Bugeye58 ]</p>
tahoe healey
Yoda
Offline
British Car Specialist sells one but it will probably cost more for shipping than the tool. It's just a 1 1/4 inch long piece of square rod you put a wrench on. I'd try a welding shop and have them cut you a piece and have them bend it like an allen wrench.
w. scott brunkhurst
Jedi Hopeful
Offline
Your local parts shop probably has a multi-ended tool on his shelf. Mine has 6 or 8 different square ends on it.
SB
SB