Thanks guys!
Buggedd: I use to have reverse tilt, but decided to change back to the stock configuration on this bonnet. I had the bonnet supports chrome plated, so need to stay the course with the stock bonnet opening. Bonnet shroud was slightly modified to clear a 16 row oil cooler in front of radiator. Everything is very close fit up front, not sure that a reverse tilt would clear cooler.
Tulsafred: This car was painted with Spies Heckers epoxy primer, build primer, base coat, and clear coat, this material is not cheep. I wanted to only apply the material once without any trash or over spray, so having a spray booth was the only option to conserve material cost and have good end results.
Dklawson: I may have posted photos of the bonnet before the paint was applied several months back. The primer was prep with 600 grit. You could literally see your reflection in the primer. After wet sanding and polish the finish will look like a black mirror.