Hi Guest!
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hap Waldrop
Yoda
Offline
Dang it, I did it agin, posted this stuff in the MG section 
, so here we go again. On ray's Project Spridget, it theme is a street legal race car, so to speak, and alot of what you see on race cars ray will have, including a external oil system simialr to what most of racer types run. First order of business is to de-BSP the system, I hate BSP, it's as sorry example of flared sealing system as nown to amn and with deal to be had with Ebay Nascar new surplus, AE/Aeroquip can be chaper than ordering braided BSP hose asemblies, and you can with very basic tool make your own hose assemblies in house. Here's the them of the system, exit the block at the normal oil exit point, upper right rear of block via a AN10 fitting that has been modied to stright threads to work with the MG block, then on to the remoote oil filter housing, and then to a AN oil colloer, then back in the block where we have a special oil block that repalces the OEM filter housing, the special fitting and oil block were bought from Winners Circle.
Here's a look at the oil exit fitting.
, so here we go again. On ray's Project Spridget, it theme is a street legal race car, so to speak, and alot of what you see on race cars ray will have, including a external oil system simialr to what most of racer types run. First order of business is to de-BSP the system, I hate BSP, it's as sorry example of flared sealing system as nown to amn and with deal to be had with Ebay Nascar new surplus, AE/Aeroquip can be chaper than ordering braided BSP hose asemblies, and you can with very basic tool make your own hose assemblies in house. Here's the them of the system, exit the block at the normal oil exit point, upper right rear of block via a AN10 fitting that has been modied to stright threads to work with the MG block, then on to the remoote oil filter housing, and then to a AN oil colloer, then back in the block where we have a special oil block that repalces the OEM filter housing, the special fitting and oil block were bought from Winners Circle. Here's a look at the oil exit fitting.
