Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
In a post awhile back Dave Russell explained how to raise the front by putting 3/4 inch spacers on the spring seats, I believe. Is there a way to raise the rear. Mine, a phase 1 BJ8, has new rear leaf springs and rebuilt shocks, but still sits almost an inch low. The rear springs are from Moss and the ride is improved over the original worn out leaf springs, but they didn't raise the car back to the 27 inch ground to top of wheel well level. Ideas???? Having recently pulled off my exhaust driving into a friend's driveway, I could really use that extra inch.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Raising the Rear
- Thread starter shorn
- Start date
Share this page
Offline
I don't know of any good, "easy", way to raise the back. Having a spring shop rearch your springs would be best. Possibly, if you could stand having stiffer springs, adding a leaf would help.
It only takes one mishap to learn to approach obstacles slowly & on an extreme diagonal. As for how I know, see attached pic.
It only takes one mishap to learn to approach obstacles slowly & on an extreme diagonal. As for how I know, see attached pic.
