• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Radiator Install...

Share this page

A

asoupley

Jedi Hopeful
Offline
Trying to install my radiator at the moment, and am having trouble getting the shroud to line up. I get the bottom holes to line up just fine, but when it comes to the top holes, it will not go back far enough to line up with the vertical bracket that comes from the frame. Instead, the splash guards that are on each side of the shroud keep hitting the side of the shroud, stopping it.

Does this make any sense?

-Tony
 
Tony -

Just a guess -- I've noticed a diff between crossflow (late 60's to 74) and standard (pre 1965 or so). Did you pay attention to this. I'm sure others can elaborate more on this.

Wish I could be of more help.

George Zeck
 
Maybe this will help explain:
IMG_2245.jpg


The circled area is where the shroud and the splash guard are hitting each other. I do not even know if I have any of this installed correctly...
 
There is a bracket that the bolt also has to go through. You may have missed it. Pull the bolts out and push the splash guard over. It is aggravating, but the next time you have to fight it things will be easier.
 
Back
Top