• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Radiator fluid

Nelson

Jedi Warrior
Country flag
Offline
I am near the point in my restoration where I need to add coolant to my radiator. The engine is newly rebuilt so I am starting with an empty system. Is there something that is better than the 50/50 water and Prestone that I used many years ago when the engine was last run? Is tap water OK to use or should I consider using something like distilled water or the stuff run through reverse osmosis at my local supermarket? Living in Ohio I have to take winter temperatures into consideration.
 
Just as always 50 50 water prestone.
 
Since you're starting with a fresh system you could look into running the latest high-tech stuff on the market. Evans NPG Waterless coolant. Much higher boiling point, much lower freezing point, less cavitation and can run at lower pressure effectively.

Boils 375°F @ 0 psi
Freezes -40°F
Viscosity 2.3cp @ 212°F
Surface Tension 44dyn/cm

Of course, all new technology comes at a price. At $30+ per gallon they aren't exactly giving this stuff away! But at lest you'll save the $27+ on the radiator and engine flushing solution! :wink:

They also have a mixture (NPG-R) that's intended for you racers out there. I haven't used any personally but I started looking into it for my turbo project. A more effective coolant on a turbo engine could yield large gains.

JACK
 
But how much energy can the stuff carry? Specific heat
 
Back
Top