Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
RickB
Yoda
Offline
I have an old Stant cap on my downflow radiator that came from my MK1 Midget.
The part that seals is farther away from the cap part by at least 1/4 inch from the caps they have at the parts place.
Anyone seen these before?
Anyone know where to get a replacement? I have heard the ones from the usually suspects are not long enough on the plunger part with the spring and the seal at the bottom.
Since I have the Datsun engine behind this I need something with about a 14 pound pressure rating and the one that came on the Midget was only 7 pounds.
The part that seals is farther away from the cap part by at least 1/4 inch from the caps they have at the parts place.
Anyone seen these before?
Anyone know where to get a replacement? I have heard the ones from the usually suspects are not long enough on the plunger part with the spring and the seal at the bottom.
Since I have the Datsun engine behind this I need something with about a 14 pound pressure rating and the one that came on the Midget was only 7 pounds.
