Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Marvin Gruber
Yoda
Offline
Just about too finish up restoration on the BJ8, new radiator so what pressure cap do I use.
Marv
Marv
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Radiator cap pressure
- Thread starter Marvin Gruber
- Start date
Share this page
AUSMHLY
Yoda
Offline
Hi Marv,
Congradulation on nearing the completion of your restoration!
If you have the stock radiatior, it has a long neck. You'll need a long neck cap, 7lbs.
I believe you have 3 choices as to what cap you can use.
1. 4 eared cap from your local Napa store.
2. 2 eared cap from Moss.
3. 2 eared cap that has made in England printed on it. BCS or Healey Surgeons carries it, Moss does not.
Here's a photo of mine, from Healey Surgeons.
Cheers, Roger
Congradulation on nearing the completion of your restoration!
If you have the stock radiatior, it has a long neck. You'll need a long neck cap, 7lbs.
I believe you have 3 choices as to what cap you can use.
1. 4 eared cap from your local Napa store.
2. 2 eared cap from Moss.
3. 2 eared cap that has made in England printed on it. BCS or Healey Surgeons carries it, Moss does not.
Here's a photo of mine, from Healey Surgeons.
Cheers, Roger