• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A R&D completed on Tr6 fan conversion

Share this page

mctriumph

mctriumph

Jedi Knight
Silver
Country flag
Offline
For the best fan conversion, I can now state with certainty that while you can use a Tr6 fan onto a Tr3/4 hub,
It is way too much work. The Tr7 fan is a 45 minute job. easy peasy. The issue is the inner diameter of the
Tr6 fan makes the Tr3 hub require a lot of work and some welding. No reason to fight this dragon
Mad dog
 
Mad Dog

Yes, thanks for confirming. Just for sake of good order, I presume you are speaking of the red TR6 13 blade fan - using the adapter?
Also, what sorta welding was required on the hub?

Bob
 
Back
Top