• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Question

Share this page

jlaird

jlaird

Great Pumpkin
Country flag
Offline
By any happy chance does anyone happen to know the thread size for the stearing shaft/stearing wheel nut.

Looks like I am going to have to chase the male threads before I can get a nut on there.
 
Have to find my thread guage and get back to you Jack. I do know it is a fine thread though and 9/16ths dia.! Hopefully someone will beat me to it ( I have to run out for a bit!).

Try 9/16-24 (Took the nut off mine to measure it and found it was rather buggered up. I will have to re-tap and get a new nut too!) I noticed in VB pp96-97 the older and newer cars have a different part#!! My 69 looks to be finer than the 59. /bcforum/images/%%GRAEMLIN_URL%%/confused.gif
 
Is 20 pitch. At least a 20 pitch thread file cleaned it up enough to get the lock washer and nut on.

Thanks guys.
 
Back
Top