• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Question electrical

Share this page

jlaird

jlaird

Great Pumpkin
Country flag
Offline
Was just messing around.

Have juice at the coil from the hot lead when I ground the other end of my tester to the car but not across the low voltage terminals.

Am I correct in that the points are open??
 
most likely,

try pushing Agatha a lil bit in gand check again.

Patrick
 
Sure wish I had a choke cable, had to send the one I got back. Now waiting for a real one. sigh.
 
Back
Top