• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Question-Bonnett support

Share this page

jlaird

jlaird

Great Pumpkin
Offline
The one that mounts across the radiator. I have one here but my other two cars did not have them.

So, were they standard on all the Bugeyes?

If so guess I will clean it up etc etc and install it.
 
I'm pretty sure that they were standard on all Bugeyes. Mine is missing, along with the 2 brakes that go from the radiator to the fenders. A project for another day...
 
Breaks that go from the fender to the radiator, you mean the supports? Show me.
 
By brakes of course I meant brackets (I'm a little sleepy today). On driver's side (RHD) it is just an L bracket. On passenger side it would have the air inlet for the heater air hose. Don't have a picture handy.
 
Ahh, ok understand. Air inlets are available from VB, maybe the bracket as well.
 
I'm probably not going to replace the heater, so I'll eventually be looking for a pair of brackets only. Thinking of doing an oil cooler where the air inlet normally goes--seems to be a common place to mount one on a Bugeye, and some extra cooling would be welcome.
 
Just wait till it gets cool, you'll be glad for the heater.
 
I might add one eventually, but it's near the bottom of the long list I've got.
 
Back
Top