• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A pvc adhesive

Share this page

N

nbailey

Member
Offline
Could someone recommend the best adhesive for the rubber seal to the pvc transmission cover? The PO used silicone which did not stick very well. Thanks in advance.
 
It’s been a while but I think I used 3M weatherstrip adhesive, a type of contact cement.
 
I second the 3M Weatherstrip Adhesive. It's tenacious stuff, and comes in black or yellow. Years ago it only came in yellow and was know as monkey snot.
 
Yep, monkey snot is the best and rough up the PVC with 60-80 grit sandpaper, clean with something like prepsol before and after sanding to get rid of the mould release agent.
Rut
 
martx-5 said:
I second the 3M Weatherstrip Adhesive. It's tenacious stuff, and comes in black or yellow. Years ago it only came in yellow and was know as monkey snot.
Click to expand...

We always called it "yellow gorilla snot." Regardless of what you want to call it, it will work much better than an RTV siliconized rubber in this application. Since the transmission cover has already been hit with the siliconized stuff, cleaning will be critical to form a good bondline so don't try and short cut that step, it is the most important one in the entire process of bonding under just about any circumstance but even more so given the history.
 
Back
Top