Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
1976Midget
Jedi Hopeful
Offline
So while sticking on my dual 38 dcoe carbs i had to remove the existing hold down braket for the Antifreeze puke tank. any suggestion on where i can relocate this. or can i remove it all together
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
puke tank relocation
- Thread starter 1976Midget
- Start date
Share this page
SilentUnicorn
Yoda
Offline
i put mun on the firewall just below the fuse box. Per this conversation. https://www.britishcarforum.com/bcforum/u...true#Post274173
tosoutherncars
Jedi Knight
Offline
Mike, the brass (pressurized) reserve? Or the plastic overflow that sits in the valley of the inner fender?
I've left the brass tank in the stock location, but am ditching the plastic tank in favour of a 'road tube'. If I build up enough heat that my overflow tank overflows... :S Something's wrong. And I hate having it there, harbouring rust & dirt etc.
-Duncan
I've left the brass tank in the stock location, but am ditching the plastic tank in favour of a 'road tube'. If I build up enough heat that my overflow tank overflows... :S Something's wrong. And I hate having it there, harbouring rust & dirt etc.
-Duncan
OP
1976Midget
Jedi Hopeful
Offline
SilentUnicorn said:
That a great place for it. thanks